• 幸运彩票
  • HECHA专用油
  • 变速箱类
  • 标准件
  • 成型胶管
  • 发动机总成
  • 非标轴承
  • 货叉类
  • 轮胎
  • 轮辋
  • 滤清器及滤芯
  • 门架类
  • 驱动桥类
  • 水箱
  • 液压元件
  • 油缸类
  • 油缸修理包
  • 制动泵与阀
  • 制动类
  • 转向桥类
  • 其他
  • News
  • Company News
  • Industry News
  • Maintenance Knowledge
  • Service
  • Sales Network
  • After Service
  • Contact
  • Contact Way
  • Message
  • Recruitment
  • Talent Idea
  • Employee Activity
  • Job Recruitment
  • cn
  • Company News Industry News Maintenance Knowledge
    Current position:HOME > News > Industry News

    Forklift tire maintenance knowledge

    editor:admin │ Release time:2018-06-28 

    About the correct maintenance method for forklift tires:

    1、Air pressure

    1)Pneumatic tires shall be inflated according to the air pressure of the "Pneumatic Load Correspondence Table" specified in the current national standards;

    2)After the tire is inflated, it should be checked whether there is air leakage in each part. If it is found, the air leakage should be repaired in time;

    3)The tire must be in use during normal use. When operating for a long time or during work, the tire pressure should be checked regularly; when parking for a long time, the front and rear axles must be erected;

    4)The air pressure is high, the tire is easy to grind the crown and crown explosion; the air pressure is low, and the tire is easily deformed and crushed;

    5)When two tires are installed together, the inflation of the two tires should be the same, not one high air pressure and one low air pressure.

    2、Internal tire

    1)To match the inner tire according to the size of the forklift tire;

    2)If the inner tire leaks, it will cause early damage to the tire;

    3)Butyl rubber inner tire is resistant to high temperature and air tightness. High-speed tires (with inner tube) should be equipped with butyl rubber inner tire;

    4)If the inner tire is to be stored separately, it should be filled with an appropriate amount of air, and should not be folded flat or stacked; if it is not stored separately, it should be placed in the tire and inflated in an appropriate amount.


    1)Always check the use of forklift tires. If damage is found, repair it immediately;

    2)When the tread wears to the wear mark, it should be stopped and refurbished;

    3)To ensure safe driving, retreaded tires are not allowed to be used as steering wheels (front wheels)。